RGASY-1000C-8Color Computer gravure printing machine for pe pp non-woven material with factory price-Tianfuchenglai-43

Description

RGASY-1000C Computer gravure printing machine:

This machine is suitable for BOPP, PET, PVC, PE, aluminum foil and roll paper and so on, with the good printing performance of the roll film material multi-color continuous printing, widely used in all kinds of high-grade printing.

 

I.          Main technical parameters

1. Flow: from right to left

2. Printing color: 6 color

3. The maximum width of material: 1030mm

4. The maximum printing width: 1000mm

5. The maximum mechanical speed: 120m/min

6. The highest printing speed: 5-100m/min (depending on the material)

7. The maximum unwinding diameter: φ600mm

8. The maximum winding diameter: φ600mm

9. Internal diameter of paper tube: φ76

10. The printing plate roller diameter: φ100mm～φ300mm

11. The printing plate roller length: 550mm ~ 1030mm

12. Register precision: longitudinal ≤±0.15mm

transverse ≤±0.15mm (manual alignment)

13. Tension setting range and accuracy: 3～25kg ±0.5kg

14. Scraping knife movement: ±5mm

15. Heating mode: electric heating

16. Drying temperature: maximum temperature of 60℃.

17. Manual tension, magnetic tape controller

18. Tension sensor (1000N) tension controller (ZXT-B-1000)

19. Dry power consumption: 66kw (6×11kw)

20. The total power of the machine: 100kW

21. Machine weight: about 10400kg

20. The overall size: L10500mm×W2800mm×H2400mm

 

II.        Suitable printing material

OPP 15～60μm

CPP 15～60μm

BOPP 15～60μm

PET 12～60μm

Glass paper 20～30μm

Nylon film 15～60μm

Paper sheet 30 ~ 80g/m2

Aluminum foil≥20μm

And other films having the same properties as the materials

16. Drying temperature: maximum temperature of 60℃.

17. Manual tension, magnetic tape controller

18. Tension sensor (1000N) tension controller (ZXT-B-1000)

19. Dry power consumption: 66kw (6×11kw)

20. The total power of the machine: 100kW

21. Machine weight: about 10400kg

20. The overall size: L10500mm×W2800mm×H2400mm

 

I.          Suitable printing material

OPP 15～60μm

CPP 15～60μm

BOPP 15～60μm

PET 12～60μm

Glass paper 20～30μm

Nylon film 15～60μm

Paper sheet 30 ~ 80g/m2

Aluminum foil≥20μm

And other films having the same properties as the materials

 

The main components and description

1. Unwinding unit

Structure and characteristics:

(1) The inner frame of the wallboard, the machining accuracy and installation accuracy are guaranteed

(2) Double arm double station rotary charging mechanism

(3) Using magnetic powder for unwinding,

(4) Automatic tension control system

(5) The rotary arm is manual reversing

(6) Inflatable roll replacement fast, accurate centering

(7) Put the reel on the rolling bearing to minimize the mechanical resistance

(8) Manual adjustment of material roll

Parameters and specifications:

(1) Max unwinding diameter: φ600mm

(2) Maximum roll width: 1030mm

(3) The inner diameter of the paper roll: φ76

(4) Material roll horizontal adjustment: ±20mm

(5) Rotary speed: 1r/min

(6) Tension setting range: 3 ~ 25kg

(7) Tension control accuracy: ±0.5kg

(8) The center height of the frame: 620mm

(9) Unwinding rack

(10 Unwinding inflatable shaft 2pcs

(11) Electrical control box and system 1pcs

2. Feed unit

Structure and characteristics:

(1) Steel roller, roller type structure

(2) Traction rubber roller 1pcs

(3) Traction steel roller 1pcs

Parameters and specifications:

(1) Tension setting range: 3 ~ 25kg

(2) Tension control accuracy: ±0.5kg

(3) Cots maximum pressure: 300kg

(4) Traction steel roller: φ120mm 1pcs

(5) Press roller: φ100mm (Shore A65°～70°), 1pcs

(6) The magnetic powder control system is adopted in the traction machine 1set

(7) Compression device 1 set

(8) Transmission device 1 set

3. Printing unit

Structure and characteristics:

(1) The base of each printing unit is an independent cast iron structure, which is convenient to assemble and disassemble

(2) The method of installing the plate is that the top of the gas is not installed in the shaft

(3) The embossing roller press structure is swing arm type, and a guide roller cooperation action, to ensure that when the pressure, the change in the length of the smallest

(4) The adjusting roller is single side adjustment

(5) With the press limit device, embossing roller

(6) The scraping knife is a manual structure, which can be adjusted in three directions and can be moved to a certain proportion

(7) Manually register, pneumatic register, spot register to move the chromatograph with computer control system

(8) The ink tray is open and open, and the upper and lower lift is adjusted manually

(9) Equipped with air cooling device, so as to quickly cool the membrane material

Parameters and specifications:

(1) Plate diameter: φ100mm～φ300mm

(2) Printing plate roller length: 550mm ~ 1030mm

(3) Embossing cots: φ120mm(Shore A70°～75°) of the 1piece

(4) Maximum impression force: 300kg

(5) Maximum immersion depth: 50mm

(6) Scraper pressure: 10 ~ 100kg (continuously adjustable)

(7) Scraper channeling: ±5mm

(8)Register precision: longitudinal ≤±0.15mm

Transverse ≤±0.15mm (manual alignment)

(9) Printing units 6 groups

(10) Oil immersed type sealing transmission box 6 pcs

(11) Horizontal manual version device 6 sets

(12) Embossing device 6 sets

Impression cylinder: (SC50×100) good brand (total of 12pcs)

(13) Adjusting roller device 6 sets

(14) The stamping limit device 6 sets

(15) Scraper device 6 sets

Steel ink plate 6 pcs

The stirring bar 6 pcs

(16) Air-cooled bellows 6pcs

Cooling fan: (DF-6 0.55kw left 0°), 6pcs

(17) Electrical control box and system 6 sets

                                                                                                                        4. Drying unit

Structure and characteristics:

(1) Integral drying rack, double drying way

(2) Heating mode is electric heating

(3) Fully enclosed oven, heat source can be air intake device

(4) Manually open the oven

(5) Automatic temperature control

Parameters and specifications:

(1) The highest temperature in the box: 80℃

(2) The length of material in the box: 1200mm

(3) Air outlet:

(4) Maximum air volume: 1800m³/h

(5) Drying rack (to be installed as a whole) 6pcs

(6) Closed drying box 6 sets

(7) Axial fan centrifugal fan

(8) Joint: 6 pcs

(9) Temperature controller 6sets

(10) Oven group 6units

5. Discharge unit

Structure and characteristics:

(1) Steel roller, roller structure

(2) Traction roller,

(3) Traction steel roller

Parameters and specifications:

(1) Tension setting range: 3 ~ 25kg

(2) Tension control accuracy: ±0.5kg

(3) Cots maximum pressure: 300kg

(4) Traction steel roller: φ120mm 1pcs

(5) Press roller: φ100mm (Shore A65°～70°), 1pcs

(6) Compression device 1 set

6. Winding unit

Structure and characteristics:

(1) The inner frame of the wallboard, the machining accuracy and installation accuracy are guaranteed

(2) Double arm double station rotary charging mechanism

(3) Swing arm forward and reverse manual

(4) Traction is driven by a torque motor

(5) The take-up reel is driven independently by two torque motors

(6) Check the printing effect with the light box

(7) Inflatable shaft

(8) The reel is placed on the rolling bearing to minimize the mechanical resistance

(9) Manual adjustment of material roll

Parameters and specifications:

(1) Maximum roll diameter: φ600mm

(2) The inner diameter of the roll paper tube: φ76

(3) Material roll horizontal adjustment: ±20mm

(4) Rotary speed: 1r/min

(5) Tension setting range: 3 ~ 25kg

(6) tension control accuracy: ±0.5kg

(7) the center height of the frame: 620mm

(8) Winding rack 1group

(9) Winding motor (torque motor) 2 sets

(10) Inspection light box assembly 1pcs

(11) Transmission cover 1set

8. Rack and material department

Structure and characteristics:

(1) Overall high strength low stress alloy cast iron wallboard

(2) The installation method of double shaft and top guide roller

(3) Modular design

Parameters and specifications:

(1) Wall thickness 60mm

(2) The center distance of each color group 1000mm

(3) Guide roller Φ70mm Φ100mm

(4) The length of the guide roller surface 1030mm

9. Other

Pneumatic components are all brand, low voltage electrical all use of Chinese CHINT, toolbox, etc.                       

Tension control configuration list

                               

Name                   Model         Quantity          Remark

Main motor              YP-50-11KW-4P-B3       1             Shanghai

Rewinding traction torque   motor 16-6             1             Shanghai

Magnetic particle controller    5kg                2               Ruian

Rewinding torque motor       40-6              1              Shanghai

Potentiometer                                 3           High-precision

Control transformer                            1

Air switch                                   Full sets            Chint

AC contactor                                 Full sets            Chint

Intermediate relay      HH54P+TP514X-220      Full sets            Chint

Proximity switch                               3                 Chint

Power switch                                  2                Chint

Control transformer                            1

 Note: different company control system, configuration may be different

 

Accessories

(1) Imported scraper 10 m

(2) Twisted ink bar, each group 1 pcs

(3) Ink pot each group 1set

(4) Open wrench 1 set

(5) Cross-shaped wrench and Word wrench each 1 pcs.

 

6. Customer provide following equipment:

(1) Three-phase, 380 volts, 110 kW power supply.

(2) Printing ink

(3) Printing solvent

(4) 6kg air pump

(5) Print Edition

(6) Printing materials