facebook
25%OFF

RHCP-A4 2 ROLL 2CUT-A4 COPY PAPER CUT AND PACK MACHINE LINE-TFCL-30

stars, based on 0reviews
Ch$195794000.00nowCh$146845500.00 set
1items available
Contact Us
Description

A4 2 ROLL 2CUT-A4 COPY PAPER CUT AND PACK MACHINE LINE

DTCP-A4 CUT AND PACK MACHINE LINE

MAIN PARTS:

1.A shaft lifting ground paper holder control system------------------- 2sets

2. Advanced tension control system------------------- 2sets

3. Anti warping mechanism ---------------------------- 1set

4. Slitting strip, knife group --------------------------- 5 sets

5. Synchronous crosscutting upper and lower blade group------------- 1set

6. High speed paper feeding system -------------------------------- 1set

7. Low speed paper feeding system --------------------------------- 1set

8. Automatic discharging device for waste paper ----------------------- 1set

9. 2D oscillations of the whole paper, wire rod lifting paper collection device--------------------- 1set

10.PLC ream of paper counting device -------------------------------- 1set

11.The paper makes vertical and horizontal discharge equipment-------1set

12.PLC failure alarm shutdown system and PLC control equipment---------------- 1set



Main technical parameters of copy paper slitting machine:

Working width: Gross width:846mm; Net width:840mm

Number of cuts: 2Roll 4 Slit 2Cut—A4 Short side 210mm

Paper roll diameter: max1200mm; min400mm

Paper core shaft diameter: 3″(76.2mm)and 6〞(152.4mm)

Paper grade: high grade copy paper, high grade writing paper, high grade offset paper and other high-grade paper. Paper weight range: 60-100g/m2

Cutting length: Design of the cutting machine is the processing of A4 paper, the cutting length of A4 long side 297mm

Paper ream count: 0-500 pages,

Paper ream height: (max)65mm

Design speed: max 250m/min

Cutting 780 times /min

Ream paper discharge cycles: 6/min

Production speed: Max 200m/min (depending on different paper)

Cut off: 635 times /min

Paper ream discharge paper weekly: 5 times /min (10-12reams/ min)

Paper load: (max) 400g/m2 (4x100g/m2)

Paper cutting accuracy: Allowable tolerance±0.2mm

Cutting condition: 1. Constant speed 2. The paper shaft must not be broken paper 3. Need qualified paper

Transmission: AC frequency conversion stepless speed regulation

Main power supply: 380V   50HZ

Control voltage: 380V

Total power:(approm)18KW

Compressed air consumption: (approm)300NL/min

Compressed air pressure: 0.6-0.8 mpa

Overall dimension of equipment: L7000(mm)× W 8000(mm)× H 1800(mm)

Total weight:9Ton


DTCP-A4 Copy paper cutting machine configuration list:

Item No. Name Quantity Origin Model No.

1 Disc pneumatic cutter 5 Sets Italy - DELSAR ——

2 Lower round cutter 5 Sets Luxembourg TCT ——

3 Crosscut blade 2pcs Luxembourg TCT ——

4 Host bearing 1 set Germany FAG ——

5 Main wall panel 2pcs China ——

6 Synchronous belt 1 set Germany EHRE ——

7 Conveyer belt 1 set Swiss RAPPLON ——

8 CPU 1 Germany SIEMENS S7-200/224

9 PLC 1 Germany SIEMENS S7-200/223(16 in 16 out)

10 PLC 1 Germany SIEMENS S7-200/223(4 in 4 out)

11 PLC 2 Germany SIEMENS S7-200/232(4 in 4 out)

12 Relay (seat) 23 Japan OMRON MY2N-J/PYF08A-E

13 Proximity sensor 1pcs Japan OMRON TL-Q5M

14 The micro switch 2 pcs Japan OMRON SS-5GL2

15 Color matching photoelectric 1 set Japan OMRON E3Z-T61

16 Contactor 1pcs German Schneider LCE1-3210

17 Contactor 1pcs German Schneider LCE1-1810

18 Contactor 4pcs German Schneider LCE1-0901

19 proximity switch 10pcs Japan OMRON E2E-X5ME1-Z

20 Photoelectric switch (round) 4pcs Japan OMRON E3FA-DN11

21 Relay (seat) 23 Japan OMRON MY2N-J/PYF08A-E

22 Frequency converter 1pcs Taiwan Liming A1000

23 Touch screen 1set Taiwan weinview MT6100I

24 Servo motor 1set German Schneider 0.2kw

25 Servo driver 1set German Schneider SGDV-2A8R01B002000

26 Reducer(1:50) 1set Taiwan Liming 0.4KW

27 Reducer(1:50) 1set Taiwan Liming 0.4KW

28 Reducer(1:10) 1set Taiwan Liming 0.4KW

29 Reducer(1:25) 1set Taiwan Liming 0.4KW

30 Three-phase asynchronous motor 1set SHANGHAI SNMA 15KW

31 Three-phase asynchronous motor 3sets SHANG HAI KUAYUE 2.2KW Y100L1-4

32 Frequency converter 2sets Denmark holip HLP-C103

33 Electrostatic eliminating device 2Groups CHINA ——

34 Transformer Frequency converter CHINA 220V-30V

35 Switching Mode Power Supply 1pcs CHINA NES-150-24


Main technical parameters of copy paper slitting machine

RHCP-A4 2 ROLL 2CUT-A4 COPY PAPER CUT AND PACK MACHINE LINE-TFCL-30 A4 2 ROLL 2CUT-A4 COPY PAPER CUT AND PACK MACHINE LINE-Tianfuchenglai

 MAIN PARTS

1.A shaft lifting ground paper holder control system------------------- 2sets

2. Advanced tension control system------------------- 2sets

3. Anti warping mechanism ---------------------------- 1set

4. Slitting strip, knife group --------------------------- 5 sets

5. Synchronous crosscutting upper and lower blade group------------- 1set

6. High speed paper feeding system -------------------------------- 1set

7. Low speed paper feeding system --------------------------------- 1set

8. Automatic discharging device for waste paper ----------------------- 1set

9. 2D oscillations of the whole paper, wire rod lifting paper collection device--------------------- 1set

10.PLC ream of paper counting device -------------------------------- 1set

11.The paper makes vertical and horizontal discharge equipment-------1set

12.PLC failure alarm shutdown system and PLC control equipment---------------- 1set

Best sellers