facebook
20%OFF

Ultrasonic cleaning and drying machine line -Tianfuchenglai-16

stars, based on 0reviews
€40726.40now€32673.68 unit
1items available
Contact Us
Description

Ultrasonic cleaning and drying machine line 

Industrial hot sale ultrasonic cleaning and drying machine line 

The main technical parameters and the relevant conditions and instructions:


Ultrasonic cleaning and drying machine line -Tianfuchenglai-16 RL2000L-Ultrasonic cleaning and drying machine line -Tianfuchenglai-16
Pass-through high-pressure spray cleaning anti-rust dryer instruction
1. Equipment process description:
1.1. Process flow:
NO.
Station name
Processing
medium
Liquid
temperature
Processing method
Filtration
accuracy
Heating system
Size
(Meter)
Tank
1
Loading part
Manual feeding
1
2
Ultrasonic
cleaning
degreasing
section
Pure water +
cleaning agent
80
Ultrasonic cleaning
Frequency: 28KHZ
Power: 2.4KW=4 sets
Φ200×700 high
Accuracy 100U
Stainless steel
heating tube
9KW=3 sticks
5
Have
3
Wind cut drip
section
0.5
4
High pressure
spray
cleaning
section
Pure water
Room
temperature
High pressure spray
High pressure pump
2.2KW=1 set
Φ200×700 high
Accuracy 100U
1.5
Have
5
High pressure
spray
cleaning
section
Pure water
Room
temperature
High pressure spray
High pressure pump
2.2KW=1 set
Φ200×700 high
Accuracy 100U
1.5
Have
6
High pressure
spray
cleaning
section
Pure water
Room
temperature
High pressure spray
High pressure pump
2.2KW=1 set
Φ200×700 high
Accuracy 100U
1.5
Have
7
Hot air cut
water section
Circulating hot
air
80
Circulating hot air
Fan 2.2KW=1 unit
Utilize the waste
heat of the
high-temperature
drying section
0.5
8
High
temperature
drying section
Circulating hot
air
130
Circulating hot air
Fan 2.2KW=2 units
Stainless steel
heating tube
2KW=24pcs
5
9
Workpiece
cooling +
blanking
section
1 radiating negative
pressure fan
1.52
The overall dimensions of the equipment: 18 meters in length, 1.8 meters in width, and 1.5 meters in height (excluding exhaust ports).
1.2. Process section configuration:
1. The first feeding section:
1. The entire process section made of stainless steel, length 1000 mm × width 300 mm × height 1200
mm.
2. The fat section at the second ultrasonic wave:
1. The entire process section is made of stainless steel, with a length of 5000 mm × a width of 1200
mm × a height of 300 mm.
2. 1 set of all stainless steel with groove, length 600mm×width 800mm×height 800mm.
3. One 0.75KW stainless steel water pump.
4. One Φ200mm×700mm stainless steel filter.
5. 10 Φ32mm double-clamp plastic nozzles.
6. Heating system: 380V stainless steel heating tube 3×9KW=27KW.
7. Two high-bottom water level protections.
8. Drainage: 2 1½" stainless steel ball valves.
9. Water inlet: 1 stainless steel ball valve with 6 points.
10. Ultrasonic system:
10.1
Vibration plate size: 1200×500mm×100mm.
10.2
28KHZ 2.4kw ultrasonic vibration plate 4 sets.
10.3 4 sets of 28KHZ 2.4kw ultrasonic control boxes.
3. The third high-pressure spray cleaning section:
1. The entire process section is made of stainless steel, L1500 mm×W1200 mm×H300 mm.
2. All stainless steel with groove, 1 setlength 800mm×width 1800mm×height 250mm.
3. 2.2KW vertical stainless steel water pump, 1 set.
4. Φ200mm×700mm stainless steel filter, 1piece.
5. Φ32mm double clip plastic nozzle, 60 pieces.
6. High and bottom water level protection, 2 pieces for each.
7. Drainage: 1½" stainless steel ball valve, 1piece.
8. Water inlet: 6-point stainless steel ball valve,1piece.
4. The fourth high-pressure spray cleaning section:
1. The entire process section is made of stainless steel, H1500 mm×W1200 mm×H 300 mm.
2. 1 set of all stainless steel with groove, length 800mm×width 1800mm×height 250mm.
3. 2.2KW vertical stainless steel water pump, 1 set.
4. Φ200mm×700mm stainless steel filter, 1 piece.
5. Φ32mm double clip plastic nozzle, 60 pieces.
6. High and bottom water level protection, 2 pieces for each.
7. Drainage: 1½" stainless steel ball valve,1 piece.
8. Water inlet: 6-point stainless steel ball valve, 1 piece.
5. The fifth high-pressure spray cleaning section:
1. The entire process section is made of stainless steel, L1500 mm×W1200 mm×H300 mm.
2. All stainless steel with groove, 1 set, L800mm×W1800mm×H250mm.
3. 2.2KW vertical stainless steel water pump, 1 set.
4. Φ200mm×700mm stainless steel filter, 1 piece.
5. Φ32mm double clip plastic nozzle, 60 pieces.3
6. High and bottom water level protection, 2 pieces for each.
7. Drainage: 1½" stainless steel ball valve, 1 piece.
8. Water inlet: 6-point stainless steel ball valve, 1 piece.
6. The sixth high-pressure wind cutting water section:
1. The entire process section is made of all stainless steel, L500 mm×W1200 mm×H300 mm.
2. High-pressure air system: 380V, 7.5KW high-pressure fan, 1 set.
3. Φ76×1200mm stainless steel air knife, 1 set.
7. The seventh high temperature drying section:
1. The overall dimensions of the drying oven: L5000 mm×W1400 mm×H600 mm.
2. The size of the inner cage of the drying furnace:L6000 mm×W1200 mm×H300 mm.
3. Peripheral material of the drying furnace: 70mm thick silicate rock wool insulation board.
4. The inner material of the drying furnace: 1.0mm thick stainless steel plate.
5. Heating system: stainless steel heating tube 2KW=24pcs
6. Hot air circulation system: 2.2KW centrifugal circulation fan, 2 sets.
8. Workpiece cooling + blanking section:
1. Cooling section size: L1500 mm×W1200 mm×H300 mm.
2. One 0.75KW negative pressure cooling fan.
Equipment operation steps and methods:
1. Turn on the main switch on the panel to check whether the three-phase power indicator is normally
turned on; if any of them are not activated:
1.1. First check whether the main power supply lacks phase.
1.2. Whether the indicator light is burned out. Corresponding treatment or maintenance shall be carried
out according to the actual situation after inspection.
2. About 10 seconds after turning on the power, the touch screen displays normally, and all the switches
are correspondingly clicked:
For example: heating, ultrasonic, circulating fan, high pressure fan, circulating water pump, spraying,
transmission switch.
3. The whole machine is equipped with two emergency stop switches, one is on the main electrical box of
the equipment, and the other is at the position of the unloading port; the whole machine will stop working
when the machine is pressed in an emergency situation during the operation of the equipment.
4. The discharge port of the equipment is equipped with a set of photoelectric switches for workpiece
inspection. When the workpiece passes through the various processes and reaches the discharge port, no
one will take the workpiece away. After the photoelectric switch is checked, it will automatically stop the
operation of the mesh belt. 

Best sellers