An automatic spray painting production line is a system that feeds paint into the machine and cycles through the painting process.automatic spray painting production line paint curing dry oven gas/diesel/electric powder coating oven with nice price In most cases it requires mechanical mixing as opposed to chemical mixing. The automatic spray painting line is most commonly used in the domestic painting industry. This type of equipment produces the highest quality paints possible with minimal cleaning required. Automatic spray paint booths or lines are also found in professional photo processing applications, as well as many industrial applications. The automatic system allows for much faster drying times than conventional mixing techniques and reduces overall clean up time as the paint does not need to undergo the same vigorous cleansing steps as other types of equipment.
Spray guns or nozzles are the tools of choice for this line of machinery. The automatic systems use a high pressure air source and deliver an even, slow drip that provides a non-woven, smooth finish to your painted surface. The automatic painting booth or system is able to handle a wide variety of paints including latex, oil, epoxy, and latex based paints.
One of the advantages of using a curing dry oven is that it provides a much deeper and thicker color with less drying time than other types of painting equipment. Curing dry ovens allow the painter to apply a thicker, more opaque color and even colors can be applied at an accelerated rate. The speed of the machine is determined by the paint being applied and can either be slow or fast depending on the type of coating being applied. Speed is also affected by the viscosity of the paint and can vary from very thin to extremely thick depending on the viscosity of the paint and the viscosity of the curing dry oven.
Other automatic spray painting equipment includes a mixing apparatus, a trigger gun, and a mixing valve. The mixing apparatus allows the operator to mix a smaller amount of paint than needed for a particular job and is therefore ideal for jobs that do not require a large amount of paint. A trigger gun is used to activate the mixing valve when the desired viscosity of the paint has been reached and it is controlled by the operator. The trigger gun is typically a hand held unit that is operated by the operator and triggers when the desired viscosity of the paint has been achieved.
The final automatic paint mixing equipment in an automatic spray painting system is the curing dry oven. This final equipment is basically a heavy duty industrial oven that is used to heat and cure the paint. Once the paint reaches the proper viscosity for the job, it is moved into the curing dry oven where it is heated to extreme temperatures and allowed to cure. Once cured, the cured paint is then ready to be sprayed directly onto the surface to be painted.
There are many different types of automatic spray painting equipment that are available to the consumer. The equipment will vary in price but it will all generally perform the same basic functions. Depending on what type of job you need the automatic spray painting units will also vary in the amount of power or "pow" that they can produce. Pow is measured in cubic feet or gallons and is the amount of paint that can be produced in one gallon of paint. The more Pow the automatic painting equipment has the faster the drying time on the job will be and the more money the operator will make.