facebook
11%OFF

Automatic Consecutive Turntable Sandblasting Machine for industrial product treatment aluminum alloy metal parts with factory price -Tianfuchenglai-4-1

stars, based on 0reviews
ج.م1775625.00nowج.م1586225.00 unit
1items available
Contact Us
Description

Automatic Consecutive Turntable Sandblasting Machine

Automatic Consecutive Turntable Sandblasting Machine for industrial product treatment aluminum alloy metal parts

Equipment supply list:

I.  Main parts of sandblasting machine, 1 set

1. Sandblasting cabin body, 1 set

2. Protective rubber sheet, 1 group

3. Lights, 2 sets

4. Sandblast tank access door, 4 pieces

5. Belt tensioning mechanism, 1 set 

6. Belt tension adjustment, 1 set

7. Filter sieve, 2 pieces

8. The big/small turntable mechanism, 1set

9. Gun swing mechanism V-type spray gun 12 pieces, 1 set

10. Surface blowing air gun, 1group 

II. Cyclone Separator,1 item 

1. Regulator, 1 piece

2. Sand back tube, 1 set 

3. Separator assembly, 1 set

 

III.  Dust box, 1 set 

1. Dust box body, 1 set

2. Cloth bag, 64 pieces

3. Pneumatic cleaning valves, 1set

4. Dust removal machine, 1 set

5. Dust - collecting bucket 1 set

          I.              Electric, gas control system

1. Electric control box   Contains control elements 1 set

2. Control panel    1 set

3. Sub-cylinder     1 set

Automatic Consecutive Turntable Sandblasting Machine for industrial product treatment aluminum alloy metal parts with factory price -Tianfuchenglai-4-1 Automatic Consecutive Turntable Sandblasting Machine for industrial product treatment aluminum alloy metal parts with nice price -Tianfuchenglai-4-1

Schedule (main technical parameters)

Equipment Name: 1921-12 automatic turntable sandblasting machine

Power requirements: voltage 380V frequency 50-60HZ

Machine size: 1900mm (length) × 2100mm (width) × 2800mm (height)

Environmental requirements: ≤ 85 dB noise (db), emissions 1.0mg / m

Sandblasting area size: 1500mm (length) × 800mm (width) × 850mm (high)

The largest work piece processing Dimension: Φ450X250mm

Scope: metal or non-metallic work piece surface cleaning and processing

Maximum load capacity: 20kg (small turntable)

Maximum load: 240kg (large turntable)

The size of the work piece access door: diameter φ400mm, height 450mm;

Work piece sandblasting work piece spacing distance: 60-80 mm

Nozzle size: diameter 8mm (boron carbide) turntable: ¢ 360mm

Sandblasting pressure: adjustable gun: aluminum alloy

Number of spray guns: 1 pc

Blasting tube: diameter 22mm air tube: 1.5

Pressure adjustment range: 0.2-0.8 (par) Air pressure stability: adjustable

Centrifugal fan: 7.5kw

Lighting and

cabin with external manual blowing dust gun 1, mainly used for debugging, maintenance

Staffing: 1 person (with 1 person)

Installed power: about 11Kw (not including the required air compressor power)

  

control system: 13Wx2 (energy-saving lamp explosion-proof type). Large turntable drive motor: 1 set 1 • 1kw Small turntable drive motor: 1 set 0.75kw Gun swing drive motor: 1 set 0.75kw Air consumption: 1m³ / min / each gun (when the pressure is 0.6Mpa) Sandblasting efficiency: the actual efficiency needs to be based on specific parts and process requirements Transmission: large turntable rotation, small turntable rotation Rust grades: Sa2.5 ~ Sa3 (GB8923-1988) 24-280 # corundum abrasives (use other types of abrasive should pay attention to adjust the configuration) Abrasive recovery method: pneumatic recycling Cyclone separation cycle Cabin protection: the use of polyurethane board protection Back to the sand tube: wear-resistant hose, flexible connection, easy to install Sandblasting

control system: 13Wx2 (energy-saving lamp explosion-proof type).


Large turntable drive motor: 1 set 1 • 1kw


Small turntable drive motor: 1 set 0.75kw


Gun swing drive motor: 1 set 0.75kw


Air consumption: 1m³ / min / each gun (when the pressure is 0.6Mpa)


Sandblasting efficiency: the actual efficiency needs to be based on specific parts and process requirements


Transmission: large turntable rotation, small turntable rotation


Rust grades: Sa2.5 ~ Sa3 (GB8923-1988)


24-280 # corundum abrasives (use other types of abrasive should pay attention to adjust the configuration)


Abrasive recovery method: pneumatic recycling Cyclone separation cycle


Cabin protection: the use of polyurethane board protection


Back to the sand tube: wear-resistant hose, flexible connection, easy to install


Sandblasting


Best sellers