Metal steel Coil slitting machine, slitting line, metal sheet cutting machine /PPGI/GI/ZINC COATING SHEET slitting machine-Tianfuchenglai-76-2

Metal steel Coil slitting machine, slitting line, metal sheet cutting machine /PPGI/GI/ZINC COATING SHEET slitting machine

PPGI/GI/ZINC COATING SHEET splitting machine

I. Process requirements 1. Material: Q235 steel plate/PPGI/GI/ZINC COATING SHEET

2. Sheet thickness: 0.15-1.8 mm, minimum strip width 20

3. The widest plate: 1250mm

4.the board is divided into 30.

5.Strip line speed is up to 100 meters / minute Technical requirements of slitting machine

1. Slitting machine knife shaft diameter Φ200, knife shaft effective length 1350, material 40Cr, quenching and tempering

2. Inner diameter of blade Φ200, outer diameter of blade 320, blade thickness 10, 6CrW2Si

3.Feeding guide device

4.The reducer is ZQ750

5.The motor is a variable frequency motor 55KW

6.The bearing seat is moved by linear guide

7. the upper knife shaft can be raised and lowered at the same time

8.The rubber spacer is mounted on the knife shaft spacer

9.guide device for inlet and outlet

10. A total of 60 blades can be divided into 30 pieces.

11.Including frequency conversion electric control

Payment methods and delivery

1. Slitting machine does not include lubricant and freight.

2. Self-provisioning of winder and unwinder

3. 60 days' advance payment to the account for delivery

4. Three packs of quality within one year (except for consumable blades and rubber pads)